КФУ. Карточка публикации. Optimal Design Process of a Steam Jet Vacuum System for a Hydrocracking Unit

КАЗАНСКИЙ
ФЕДЕРАЛЬНЫЙ УНИВЕРСИТЕТ

RUS

- EN
- 中文
- ES

OPTIMAL DESIGN PROCESS OF A STEAM JET VACUUM SYSTEM FOR A HYDROCRACKING UNIT

Форма представления

Статьи в зарубежных журналах и сборниках

Год публикации

2016

Язык

английский

Авторы, сотрудники КФУ

Осипов Эдуард Владиславович, автор

Библиографическое описание на языке оригинала

Osipov E.V. Optimal Design Process of a Steam Jet Vacuum System for a Hydrocracking Unit / E.V. Osipov, Telyakov, E.S. Sadуkov, K.S. // Chemical and Petroleum Engineering, Vol. 52, Nos. 5–6, September, 2016 (Russian Original Nos. 5–6, May–June, 2016)

Аннотация

The article describes the calculations and design of a steam jet vacuum system for the column of a hydrocracking unit. Based on calculation results (considering specifi c operating conditions of the production), several variants of pressure distribution through the pump stages were calculated, and the optimal schematic of the vacuum system was defi ned, yielding a 20% reduction in energy consumption and a 15% reduction in capital costs.

Ключевые слова

vacuum system, steam jet vacuum pump.

Название журнала

Chemical and Petroleum Engineering

Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на эту карточку

https://repository.kpfu.ru/?p_id=143550

Полная запись метаданных

Поле DC	Значение	Язык
dc.contributor.author	Осипов Эдуард Владиславович	ru_RU
dc.date.accessioned	2016-01-01T00:00:00Z	ru_RU
dc.date.available	2016-01-01T00:00:00Z	ru_RU
dc.date.issued	2016	ru_RU
dc.identifier.citation	Osipov E.V. Optimal Design Process of a Steam Jet Vacuum System for a Hydrocracking Unit / E.V. Osipov, Telyakov, E.S. Sadуkov, K.S. // Chemical and Petroleum Engineering, Vol. 52, Nos. 5–6, September, 2016 (Russian Original Nos. 5–6, May–June, 2016)	ru_RU
dc.identifier.uri	https://repository.kpfu.ru/?p_id=143550	ru_RU
dc.description.abstract	Chemical and Petroleum Engineering	ru_RU
dc.description.abstract	The article describes the calculations and design of a steam jet vacuum system for the column of a hydrocracking unit. Based on calculation results (considering specifi c operating conditions of the production), several variants of pressure distribution through the pump stages were calculated, and the optimal schematic of the vacuum system was defi ned, yielding a 20% reduction in energy consumption and a 15% reduction in capital costs.	ru_RU
dc.language.iso	ru	ru_RU
dc.subject	vacuum system	ru_RU
dc.subject	steam jet vacuum pump.	ru_RU
dc.title	Optimal Design Process of a Steam Jet Vacuum System for a Hydrocracking Unit	ru_RU
dc.type	Статьи в зарубежных журналах и сборниках	ru_RU