КФУ. Карточка публикации. The Research of Stresses in the Molds of Injection Molding Machines

КАЗАНСКИЙ
ФЕДЕРАЛЬНЫЙ УНИВЕРСИТЕТ

RUS

- EN
- 中文
- ES

THE RESEARCH OF STRESSES IN THE MOLDS OF INJECTION MOLDING MACHINES

Форма представления

Статьи в зарубежных журналах и сборниках

Год публикации

2016

Язык

английский

Авторы, сотрудники КФУ

Мухаметзянова Гульнара Фагимовна, автор

Харисов Ленар Рустамович, автор

Авторы, студенты КФУ

Яковлева Динара Маратовна, автор

Библиографическое описание на языке оригинала

Yakovleva D.M, Mukhametzyanova G.F, Kharisov L.R., The Research of Stresses in the Molds of Injection Molding Machines//Procedia Engineering. - 2016. - Vol.150, Is.. - P.453-457.

Аннотация

The article presents the analysis of casting molds failure under pressure. It was found that the main causes are physical and chemical activity of the casting alloy, the nature of the used materials and the intensity of the cyclic temperature-power loading. The technique of the stress assessment in the molds is presented. The schedule of distribution of axial and tangential stresses in the cross section of the sprue bushing in various stages of compression is made up. It is found that the maximum level of stress occurs at the contact surfaces during the filling and the subsequent brief exposure of the melt in the mold.

Ключевые слова

injection molding; mold; stresses

Название журнала

Procedia Engineering

URL

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84984822364&partnerID=40&md5=0d1bc39d9b257336e245853dcdf31cf4

Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на эту карточку

https://repository.kpfu.ru/?p_id=139564

Полная запись метаданных

Поле DC	Значение	Язык
dc.contributor.author	Мухаметзянова Гульнара Фагимовна	ru_RU
dc.contributor.author	Харисов Ленар Рустамович	ru_RU
dc.contributor.author	Яковлева Динара Маратовна	ru_RU
dc.date.accessioned	2016-01-01T00:00:00Z	ru_RU
dc.date.available	2016-01-01T00:00:00Z	ru_RU
dc.date.issued	2016	ru_RU
dc.identifier.citation	Yakovleva D.M, Mukhametzyanova G.F, Kharisov L.R., The Research of Stresses in the Molds of Injection Molding Machines//Procedia Engineering. - 2016. - Vol.150, Is.. - P.453-457.	ru_RU
dc.identifier.uri	https://repository.kpfu.ru/?p_id=139564	ru_RU
dc.description.abstract	Procedia Engineering	ru_RU
dc.description.abstract	The article presents the analysis of casting molds failure under pressure. It was found that the main causes are physical and chemical activity of the casting alloy, the nature of the used materials and the intensity of the cyclic temperature-power loading. The technique of the stress assessment in the molds is presented. The schedule of distribution of axial and tangential stresses in the cross section of the sprue bushing in various stages of compression is made up. It is found that the maximum level of stress occurs at the contact surfaces during the filling and the subsequent brief exposure of the melt in the mold.	ru_RU
dc.language.iso	ru	ru_RU
dc.subject		ru_RU
dc.title	The Research of Stresses in the Molds of Injection Molding Machines	ru_RU
dc.type	Статьи в зарубежных журналах и сборниках	ru_RU