| Форма представления | Статьи в зарубежных журналах и сборниках |
| Год публикации | 2017 |
| Язык | английский |
|
Головко Александр Николаевич, автор
Кондрашов Алексей Геннадьевич, автор
|
| Библиографическое описание на языке оригинала |
Golovko A.N, Kondrashov A.G, Yurasov S.Yu., Improved Design of a Worm Type Instrument for Final Machining of Evolvent Gear Teeth//Procedia Engineering. - 2017. - Vol.206, Is.. - P.1333-1336. |
| Аннотация |
In connection with the absence of possibility to process gear-wheels with large allowance at machining of disk shavers (for example, after the preliminary rolling-up of points), N.V. Smorkalov et al. have worked out the construction of a worm type instrument with a continuous spiral cutting edge. The limitations of this construction were unfavorable terms of cutting wedge work for lack of the structurally executed rake which resulted in the subzero treatment productivity. For simplification of the procedure, regrinding of this instrument and minimization of the nascent “organic” error at regrinding on the outward cylindrical surface, a decision was made to bring in the instrument construction developed by N.V. Smorkalov et al. of positive rake γ, form a radius ditch and two antihunt ribbons breadthways l executed on an outward cylindrical surface. |
| Ключевые слова |
Worm type instrument, final machining, evolvent gear teeth |
| Название журнала |
Procedia Engineering
|
| URL |
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85035111965&doi=10.1016%2fj.proeng.2017.10.640&partnerID=40&md5=d354da0259eb8eb3a945f4003d2d5f55 |
| Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на эту карточку |
https://repository.kpfu.ru/?p_id=169545 |
Полная запись метаданных  |
| Поле DC |
Значение |
Язык |
| dc.contributor.author |
Головко Александр Николаевич |
ru_RU |
| dc.contributor.author |
Кондрашов Алексей Геннадьевич |
ru_RU |
| dc.date.accessioned |
2017-01-01T00:00:00Z |
ru_RU |
| dc.date.available |
2017-01-01T00:00:00Z |
ru_RU |
| dc.date.issued |
2017 |
ru_RU |
| dc.identifier.citation |
Golovko A.N, Kondrashov A.G, Yurasov S.Yu., Improved Design of a Worm Type Instrument for Final Machining of Evolvent Gear Teeth//Procedia Engineering. - 2017. - Vol.206, Is.. - P.1333-1336. |
ru_RU |
| dc.identifier.uri |
https://repository.kpfu.ru/?p_id=169545 |
ru_RU |
| dc.description.abstract |
Procedia Engineering |
ru_RU |
| dc.description.abstract |
In connection with the absence of possibility to process gear-wheels with large allowance at machining of disk shavers (for example, after the preliminary rolling-up of points), N.V. Smorkalov et al. have worked out the construction of a worm type instrument with a continuous spiral cutting edge. The limitations of this construction were unfavorable terms of cutting wedge work for lack of the structurally executed rake which resulted in the subzero treatment productivity. For simplification of the procedure, regrinding of this instrument and minimization of the nascent “organic” error at regrinding on the outward cylindrical surface, a decision was made to bring in the instrument construction developed by N.V. Smorkalov et al. of positive rake γ, form a radius ditch and two antihunt ribbons breadthways l executed on an outward cylindrical surface. |
ru_RU |
| dc.language.iso |
ru |
ru_RU |
| dc.subject |
Worm type instrument |
ru_RU |
| dc.subject |
final machining |
ru_RU |
| dc.subject |
evolvent gear teeth |
ru_RU |
| dc.title |
Improved Design of a Worm Type Instrument for Final Machining of Evolvent Gear Teeth |
ru_RU |
| dc.type |
Статьи в зарубежных журналах и сборниках |
ru_RU |
|
EN 
中文 
ES 
Карта сайта
