КФУ. Карточка публикации. Search for the optimal method of making reticular neck telescopic implants

КАЗАНСКИЙ
ФЕДЕРАЛЬНЫЙ УНИВЕРСИТЕТ

RUS

- EN
- 中文
- ES

SEARCH FOR THE OPTIMAL METHOD OF MAKING RETICULAR NECK TELESCOPIC IMPLANTS

Форма представления

Статьи в российских журналах и сборниках

Год публикации

2018

Авторы, сотрудники КФУ

Касимова Венера Фаиковна, автор

Кашапов Ленар Наилевич, автор

Кашапов Наиль Фаикович, автор

Кашапов Рамиль Наилевич, автор

Кашапова Регина Марсовна, автор

Авторы, аспиранты КФУ

Кашапова Регина Марсовна, автор

Библиографическое описание на языке оригинала

IOP Conference Series: Materials Science and Engineering Volume 412, Issue 1, 23 October 2018, Номер статьи 012089 International Scientific-Technical Conference on Innovative Engineering Technologies, Equipment and Materials 2017, ISTC-IETEM 2017; Kazan; Russian Federation; 6 December 2017 до 8 December 2017; Код 142227

Аннотация

The production of individual implants, intended for a specific clinical case, is increasingly used in medicine. The next stage in the development of implants is the creation of a non-monolithic mesh structure of the implant body. This allows to reduce its weight without loss of mechanical characteristics, and the main thing is to fill the free intergrid space with bioresorbable material, which will be replaced by cells in the future. The creation of a reticular three-dimensional structure of the implant is a complex technical task and requires the search for new ways of production. In this paper, a comparative study of the possibilities of selective laser melting and casting on burned-out models of telescopic implants obtained by 3D printing methods is carried out. Various production methods produced prototypes of telescopic cervical implants and carried out their technical and economic analysis. It is established that the best quality of products is observed by Selective Laser Melting

Ключевые слова

Bioresorbable materialsComparative studiesMechanical characteristicsOptimal methodsProduction methodsQuality of productSelective laser meltingThree-dimensional structure

Издательство

Institute of Physics Publishing

URL

http://iopscience.iop.org/article/10.1088/1757-899X/412/1/012089/pdf

Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на эту карточку

https://repository.kpfu.ru/?p_id=193921

Полная запись метаданных

Поле DC	Значение	Язык
dc.contributor.author	Касимова Венера Фаиковна	ru_RU
dc.contributor.author	Кашапов Ленар Наилевич	ru_RU
dc.contributor.author	Кашапов Наиль Фаикович	ru_RU
dc.contributor.author	Кашапов Рамиль Наилевич	ru_RU
dc.contributor.author	Кашапова Регина Марсовна	ru_RU
dc.contributor.author	Кашапова Регина Марсовна	ru_RU
dc.date.accessioned	2018-01-01T00:00:00Z	ru_RU
dc.date.available	2018-01-01T00:00:00Z	ru_RU
dc.date.issued	2018	ru_RU
dc.identifier.citation	IOP Conference Series: Materials Science and Engineering Volume 412, Issue 1, 23 October 2018, Номер статьи 012089 International Scientific-Technical Conference on Innovative Engineering Technologies, Equipment and Materials 2017, ISTC-IETEM 2017; Kazan; Russian Federation; 6 December 2017 до 8 December 2017; Код 142227	ru_RU
dc.identifier.uri	https://repository.kpfu.ru/?p_id=193921	ru_RU
dc.description.abstract	The production of individual implants, intended for a specific clinical case, is increasingly used in medicine. The next stage in the development of implants is the creation of a non-monolithic mesh structure of the implant body. This allows to reduce its weight without loss of mechanical characteristics, and the main thing is to fill the free intergrid space with bioresorbable material, which will be replaced by cells in the future. The creation of a reticular three-dimensional structure of the implant is a complex technical task and requires the search for new ways of production. In this paper, a comparative study of the possibilities of selective laser melting and casting on burned-out models of telescopic implants obtained by 3D printing methods is carried out. Various production methods produced prototypes of telescopic cervical implants and carried out their technical and economic analysis. It is established that the best quality of products is observed by Selective Laser Melting	ru_RU
dc.language.iso	ru	ru_RU
dc.publisher	Institute of Physics Publishing	ru_RU
dc.subject		ru_RU
dc.title	Search for the optimal method of making reticular neck telescopic implants	ru_RU
dc.type	Статьи в российских журналах и сборниках	ru_RU