KFU. Card publication. Structural design method for constructions: Simulation, manufacturing and experiment

KAZAN
FEDERAL UNIVERSITY

- RUS
- 中文
- ES

STRUCTURAL DESIGN METHOD FOR CONSTRUCTIONS: SIMULATION, MANUFACTURING AND EXPERIMENT

Form of presentation

Articles in international journals and collections

Year of publication

2021

��

��

Authors, employees of KFU

Bolshakov Pavel Vladislavovich, author

Kashapov Ramil Nailevich, author

Sachenkov Oskar Aleksandrovich, author

Kharin Nikita Vyacheslavovich, author

Bibliographic description in the original language

Bolshakov P, Kharin N, Kashapov R, Sachenkov O. Structural design method for constructions: Simulation, manufacturing and experiment//Materials. - 2021. - Vol.14, Is.20. - Art. �6064.

Annotation

The development of additive manufacturing technology leads to new concepts for design implants and prostheses. The necessity of such approaches is fueled by patient-oriented medicine. Such a concept involves a new way of understanding material and includes complex structural geometry, lattice constructions, and metamaterials. This leads to new design concepts. In the article, the structural design method is presented. The general approach is based on the separation of the micro- and macro-mechanical parameters. For this purpose, the investigated region as a complex of the basic cells was considered. Each basic cell can be described by a parameters vector. An initializing vector was introduced to control the changes in the parameters vector. Changing the parameters vector according to the stress-strain state and the initializing vector leads to changes in the basic cells and consequently to changes in the microarchitecture. A medium with a spheroidal pore was considered as a basic cell. Porosity and ellipticity were used for the parameters vector. The initializing vector was initialized and depended on maximum von Mises stress. A sample was designed according to the proposed method. Then, solid and structurally designed samples were produced by additive manufacturing technology. The samples were scanned by computer tomography and then tested by structural loads. The results and analyses were presented.

Keywords

structural design, porous constructions, additive manufacturing, CT

The name of the journal

Materials

URL

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85117463368&doi=10.3390%2fma14206064&partnerID=40&md5=4e5dafa70d1f71f0432e3cb1b5f68ff5

Please use this ID to quote from or refer to the card

https://repository.kpfu.ru/eng/?p_id=259883&p_lang=2

Full metadata record

Field DC	Value	Language
dc.contributor.author	Bolshakov Pavel Vladislavovich	ru_RU
dc.contributor.author	Kashapov Ramil Nailevich	ru_RU
dc.contributor.author	Sachenkov Oskar Aleksandrovich	ru_RU
dc.contributor.author	Kharin Nikita Vyacheslavovich	ru_RU
dc.date.accessioned	2021-01-01T00:00:00Z	ru_RU
dc.date.available	2021-01-01T00:00:00Z	ru_RU
dc.date.issued	2021	ru_RU
dc.identifier.citation	Bolshakov P, Kharin N, Kashapov R, Sachenkov O. Structural design method for constructions: Simulation, manufacturing and experiment//Materials. - 2021. - Vol.14, Is.20. - Art. �6064.	ru_RU
dc.identifier.uri	https://repository.kpfu.ru/eng/?p_id=259883&p_lang=2	ru_RU
dc.description.abstract	Materials	ru_RU
dc.description.abstract	The development of additive manufacturing technology leads to new concepts for design implants and prostheses. The necessity of such approaches is fueled by patient-oriented medicine. Such a concept involves a new way of understanding material and includes complex structural geometry, lattice constructions, and metamaterials. This leads to new design concepts. In the article, the structural design method is presented. The general approach is based on the separation of the micro- and macro-mechanical parameters. For this purpose, the investigated region as a complex of the basic cells was considered. Each basic cell can be described by a parameters vector. An initializing vector was introduced to control the changes in the parameters vector. Changing the parameters vector according to the stress-strain state and the initializing vector leads to changes in the basic cells and consequently to changes in the microarchitecture. A medium with a spheroidal pore was considered as a basic cell. Porosity and ellipticity were used for the parameters vector. The initializing vector was initialized and depended on maximum von Mises stress. A sample was designed according to the proposed method. Then, solid and structurally designed samples were produced by additive manufacturing technology. The samples were scanned by computer tomography and then tested by structural loads. The results and analyses were presented.	ru_RU
dc.language.iso	ru	ru_RU
dc.subject	structural design	ru_RU
dc.subject	porous constructions	ru_RU
dc.subject	additive manufacturing	ru_RU
dc.subject	CT	ru_RU
dc.title	Structural design method for constructions: Simulation, manufacturing and experiment	ru_RU
dc.type	Articles in international journals and collections	ru_RU